CEMKRET 8

Send Page

General data
Length	7.297 mm
Width	2.200 mm
Height	2.500 mm
Ground clearance	320 mm
Max. longitudinal gradient while driving	30%
Max. transversal gradient while driving	10%
Inner turning radius	2.400 mm
Outer turning radius	5.770 mm
Weight	9.200kg (20.282 Ib) without load / 18.200 kg (40.124 Ib) with load

Dry- bulk transport tank for cement and dry mix
Maximum transport capacity	8,25 t
Maximum discharge speed	50 t/h - emptying the tank in approx. 10 min
Discharge height	1.428 mm (4,7 ft)
Two discharge helixes	D 250 mm
Auger drive system	2 units (ancillary transmission and hydraulic motor)
4 electric vibrators ( 2 per side )	24V
Rear discharge opening	500 x 250 mm
Closing lid for discharge opening	Manual opening and closing
2 openings for loading the tank at the top	D 400 mm (configurable)
Access ladder to upper tank section	Lateral
Control panel	Left exterior and inside driving cabin

Diesel Engine
Type	Turbo-Intercooler, 6 cylinders
Maximum power	130 kW (174 HP) at 2.500 rpm
Cooling	Water
Engine emissions	In accordance with EU-Stage III A / EPA-Tier 3
Catalyst	DCL Ind. MINE-X DC8
Fuel tank	160l
AAC system	Automatic altitude compensation

Transmission and axles
Transmission	Hydrostatic progressive system with continous variation (ICVD), gearbox and hydraulic variable motor, no gears to change
Operation	Continuous without interruption of traction, self-adjusting based on power requirement (load and slope)
Driving and steering	Four- wheel drive and four - wheel steering (4WD / 4WS)
Axle type	Heavy duty directional planetary axles
Front axle	Fixed and directional
Rear axle	Swing and directional
Electronic speed control system (inclinometer)	To travel along down slopes
Tyres / Wheel rims	For mining, 12.00-R20

Brakes
Service brakes	On both axles, multi-disc type in oil bath, hydraulic, with independent circuits
Parking brakes (negative)	On both axles, internal SAHR discs, hydraulic operation

Performance
Maximum speed	20 km/h (12.4 mph)
Maximum speed without load in tunnel with 1:7 slope	20 km/h (12.4 mph)
Maximum speed at full load in tunnel with 1:7 slope	10 km/h (6.2 mph)
Maximum climbing capacity at full load	30% (SAE standard)

Other features
Cabin	FOPS / ROPS certified
Driving ligths	2 front + 2 rear LEDs
Working lights	4 fornt + 4 rear LEDs
Rear camera	Night-vision
Water tank	200 l
Manual fire extinguisher	6 kg
Omnidirectional beacon	Rotating / amber
High-pressure water pump for cleaning	With hose winding system and gun
Operator presence detection system	Driver seat

Optional equipment
Fire suppression system, automatic / manual operation
Closed driving cabin
Air-conditioning and heating


Maximum theoretical values listed.
Specifications subject to change without prior notice.
Photos and drawings are for illustrative purposes only.
For available options, please consult the factory.

CEMKRET 8

The low-profile cement and dry-mix transporter for mining CEMKRET 8, with a transport capacity of 8,25 tons, is useful for underground mining operations with an on-site concrete plant. Due to the four electric vibrators and the capacity of the two discharging augers, the time needed to unload the material is reduced to a minimum. The 6-cylinder, 130 kW (174 HP) engine provides great climbing and driving power, as well as the possibility to use the equipment at great height. The Diesel engine has an AAC (Automatic Altitude Compensation) system that enables its operation at high altitude offering the same performance. A compact design with state-of-the-art axles, both directional and powered, offers great mobility and maneuverability through galleries and tunnels with small cross sections. In order to guarantee full safety during down slope routes CEMKRET 8 includes an automatic speed regulation system, which allows traveling at full load with total safety as well as a combination of service brakes in both axles multidisc in oil bath and a hydrostatic holding system ensuring a safe and speedy transport.